On January 8th, 2019 we were made aware that an e700 sales demonstration unit (SN EV70172-2015) caught fire during customer evaluation outside Canada. There was no patient or staff injury. The device was disconnected and removed from the vehicle.
This device was manufactured in April 2015 and had been returned for service in October 2018 for the TFT screen to be replaced. The demonstration unit was received by O-Two on the 10th of January and inspected to ascertain the cause. It was found that during the replacement of the TFT screen, one of the screen retaining screws was incorrectly inserted. Due to this improper screw insertion the screw sat higher than normal allowing it to contact the underside of the main board causing the screw to rub against the bottom side of the board, wearing away the insulation layer and creating a short circuit.